Nature Weave
Our new collection of Balta’s flatweave Designer collection. Heavy duty carpet made with Balta’s highly durable stainsafe yarn. Top trending carpet for stairs and contemporary rooms.
INSTALLATION GUIDELINE:
- The flatweave texture of Nature carpets should be fitted by professionals.
- The subfloor should be dry and clean.
- The floor should also be levelled with a filler at least 24 hours before fitting.
- Balta recommends a 24 hour acclimatisation of the carpet in the room where it will be fitted.
- Open the packaging with care.
- following points should be observed for a correct fitting:
– There is a top piece and bottom piece. These are very different.
– The products can be recognised as follows:
• Top piece: uneven roll number
• Bottom piece: even roll number - Balta recommends to fully adhere the carpet using quality adhesives.
- For the fitting of a seam you should proceed as follows:
– Both strips should be cut separately in advance. Do not lay them on each other and cut through both at the same time!
– The cutting should be done from the top with a sharp knife. For a perfect seam the knife should be held slightly tilted.
– Always cut between the white threads. A top seam should always be avoided. - Press the carpet firmly.
- A freshly fitted and glued carpet can have that typical ‘new’ smell. This smell disappears after a few days of ventilation and heating.
- Nature Design 4025 – 17 (Stock only)
- Nature Design 4027 – 12 (Stock only)
- Nature_design_K402_402 (Stock only)7_0013_1435750559 (1)
- Nature_design_K402_402 (Stock only) 7_0015_1435750561 (1)
- Nature Design 4027 – 17 (Stock only)
- Nature_K387_4508_0027 1 (Stock only))
- Nature Craft 4508 – 38 (Stock only)
- Nature Herringbone 7316 – 34 (Stock only)
- Nature Herringbone 7316 – 35 (Stock only)
- Nature Herringbone 7316 – 36 (Stock only)
- Nature Craft 8210 – 37 (Stock only)
- Nature Craft 8210 -58 (Stock only)